14th October 2015 PUNE

Technical Program on

Shot Peening 

by renowned materials scientist from Cummins USA Mr. Steve Ferdon​

26th to 28th August 2014

2nd July 2014

Laser process is new generation Material Processing technique. CO2, Diode Lasers haswide applications in Automotive & Engineering Industry. Laser cutting, Laser Welding,Cladding, Micro-machining are few applications. Laser Heat treatment(Hardening) is also emerging as new application. This presentation will cover LaserCutting, Welding, Cladding, Micro-machining & Laser Hardening.

Date: Monday 21st Apr 2014 at 7.00 pm sharp.

26th to 30th May 2015

​STUDENT MATERIAL CAMP 


​26th to 30th May 2015
Venue : Materials Eng & Metallurgy department, 
COEP, Shivajinagar , Pune
​​​

20th September 2017 - 7.00PM
Technical Presentation: 

Hot & Cold Quench Oils: Apar Facts & Case studies

SPEAKER: SUDHIR KADADI

Organised by ASM International Pune CHapter & Apar Industries LTD

(update) Venue: Regal Hall - Hotel pride, University Road, Pune

28th Dec 2016

6.30 PM

lecture 

TOPIC:

Novel Structural Materials for Multifunctional and Sustainable Applications

BY:

dr. Surojit Gupta
Advanced Materials Research Group,
Mechanical Engineering Department,
University of North Dakota - USA  

VENUE : ARKEY CONFERENCE SERVICE CALL
6TH LANE, PRABHAT ROAD, PUNE

11 MAY, 2016 PUNE
7:00 PM

TECHNICAL PRESENTATION

SHOT PEENING - HOW TO CONVERT CUSTOMER EXPECTATIONS INTO REALITY

by

AMIT ARADHYE 
MD
PRECICUT ENGINEERS

VENUE : HOTEL TARAWADE CLARKS INN, SHIROLE ROAD, OFF J.M. ROAD, SHIVAJI NAGAR 

April 6, 2018
​ONE DAY WORKSHOP ON CQI 9 

Venue: Plot P-7, MIDC, Chakan Industrial Area Phase-1, Talegaon Chakan road, Khalumbre, Pune 410501 India

Faculty :

Mr. P M Kulkarni, Corporate Quality, TATA MOTORS LTD 

Mr. Hemant Zaveri ASM EC Member will be the co-speaker assisting Mr. P M Kulkarni on the subject of Calibration vis avis CQI 9.

15th october 2017
Dr. APJ Abdul Kalam Award Lecture and ASM Materials Day hosted jointly by ASM International Pune Chapter and College of Engineering Pune. 

​Topic:

Evolution of Materials for the Aerospace Industry

Speaker: Dr. Pratyush Kumar, President, Boeing India and Vice President Boeing International

​Venue: New Auditorium, Near COEP Boat Club, College of Engineering Pune.  

15th october 2017 - 4:30 pm

15th October 2016

7.00 PM

TECHNICAL PRESENTATION & NETWORKING WITH
JON d. tIrPAK, pe, fasm

PRESIDENT

ASM INTERNATIONAL, USA

TOPIC:

ADDITIVE MANUFACTURING & FORGING

​VENUE : REGAL HALL, HOTEL PRIDE, UNIVERSITY ROAD, PUNE

presentation will be  followed by cocktail & dinner

may 14, 15, 16
​student material camp - 2018

Venue: metallurgy department, college of engineering - pune

3 february 2016 PUNE

Technical Program on

Meteorology in product and role of laboratory accreditation

by Mr Kshirsagar

June 11, 12

2 DAY PROFICIENCY IMPROVEMENT PROGRAM ORGANISED IN ASSOCIATION WITH ARAI 
​Foundry Technology with specific focus on Automotive Casting 

Venue: ARAI-Forging Industry Division, Chakan, Pune

Background & Objectives of this programme are as below:

Casting is the oldest manufacturing process and has inherent advantages of Design flexibility, high production rate and ability to produce large & complex shapes. Challenges to Indian Metal Casting Industries are high Cost of technology (Modern equipment’s), Cost of energy and Environment pollutions. The focus is more on Quality (not on the Quantity), Right at first & every time, Waste reduction (improving the productivity), Defect prevention (not on defect rectification) and Reduction in lead time (design & produce). Due to globalisation, Indian foundry must understand changing global scenario, should witness new challenges to face new opportunities to grab.

This course introduces the process of metal casting and provides a broad picture of casting production from designer’s perspective. It illustrates the technology, complexity involved, types of castings, casting design, process selection, methoding, casting tools & equipment’s & quality assurance and key safety and environmental regulations & competitiveness. A detailed coverage of iron melting, solidifications & related processes, metallurgy of casting process & product and identifying casting defects & remedies will be discussed. Characterisation & properties of iron & aluminium alloys and their general applications along with decision making process will be discussed.

The speakers selected for each topic are experts in their field and bring along a rich experience of theory and its application, and has through understanding of Automotive industry requirements.

28TH august 2016

6:30 PM

ASM Pune Annual Day Celebration 

The agenda for evening 

1. AGM 6.30 7.30 PM

2. Technical talk on innovation in materials by Dr. R K Singh 7.30 to 8.30 PM

3. Presentation by Mr Prem Aurora chairman ASM India National Council.

4. Felicitations OF NEW MEMBERS

5. Networking dinner.

​

VENUE : BOAT CLUB - PUNE

Date : Wednesday 3 rd February 2016.
Time : 7.30 PM.
Venue: Crystal hall Hotel Pride Shivajinagar, Pune 

6th October 2017 - 4.30 PM
 presentation cum briefing of M&MT - 2017

Venue: MCCIA - BHOSARI SEMINAR HALL ii

23 march 2017 - 7.00PM
Technical Presentation on 
IMPORTANCE OF CONTROL IN HEAT TREATMENT FURNACES

Conducted by - ASM International Pune Chapter & gefran

pRESENTED BY - mR. kALPESH dESAI. 
gm - gEFRAN iNDIA PVT LTD
Venue: hOTEL pRIDE, uNIVERSITY rOAD, Pune

19th October 2016

6:30 PM

technical talk on, 'metal joining without rivet'

-by Mr. Shirish Vaidya

​

VENUE : ARKEY CONFERENCE SERVICE CALL

6TH LANE, PRABHAT ROAD, PUNE

22 February to 24 February 2017

Three Day Proficiency Improvement Programme 

TOPIC:

Foundry Technology

(From Designer's perspective. Sand & Die casting included)

Conducted by:

ARAI Academy & ASM International Pune Chapter

VENUE: ARAI - FID, Chakan, Pune

Background & Objectives of this programme are as below:

Casting is the oldest manufacturing process and has inherent advantages of design flexibility, high production rate and ability to produce large & complex shapes. Challenges to Indian Metal Casting Industries are igh cost of technology (Modern equipments), cost of energy and environmental hazards. The focus is more on Quality (not on the Quantity), right at first & every time, waste reduction (improving the productivity), defect prevention (not on defect rectification) and Reduction in lead time (design & produce). Due to globalization, Indian foundry must understand changing global scenario, new challenges and grab new opportunities.

This course introduces the process of metal casting and provides a broad picture of casting production from designer’s perspective. It illustrates the technology, complexity involved, types of castings, casting design, process selection,methoding, casting tools & equipment’s & quality assurance and key safety and environmental regulations & competitiveness. A detailed coverage of iron melting, solidifications & related processes, metallurgy of casting process & product and identifying casting defects & remedies will be discussed. Characterisation & properties of iron & aluminium alloys and their general applications along with decision-making process will be discussed.

WHO SHOULD ATTEND?

This training is useful for all industry professionals, who needs to havecomprehensive understanding of Casting / Foundry Technology (Sand & Die casting), its fundamentals, operations, quality assurance and product design & development and best practices followed in it. Also suitable for working professionals in the area of:

ü  Engineers working in Design Dept., Product Development, R&D, Inspection, Testing, Quality Assurance & CAE.

ü  Workingin in atechno commercial activities.

ü  Vendor Development Engineers

ü  Small and Medium Scale Entrepreneurs interested in understanding Foundry & Die Castings.

ü  Metallurgists / Materials Engineers

ü  Senior Scientists from Research Institutions / Laboratories

ü  Academicians from Institutions.

ü  Interested working professionals.

ü  Marketing Professionals and Manufacturers.

ü  Engineers / Managers working as Supervisors, Technicians, Graduate / Diploma Trainees & Executives

21 June 2017
Technical Presentation by 

mr. Jayanth Murthy on
Wheelabrator Surface Preparation Solutions

ORGANIZED BY ASM INTERNATIONAL PUNE CHAPTER & WHEELABRATOR 
Venue: Boat Club, Bund Garden - Pune

15th October 2016

7.00 PM

TECHNICAL PRESENTATION & NETWORKING WITH
JON d. tIrPAK, pe, fasm

PRESIDENT

ASM INTERNATIONAL, USA

TOPIC:

ADDITIVE MANUFACTURING & FORGING

​VENUE : REGAL HALL, HOTEL PRIDE, UNIVERSITY ROAD, PUNE

presentation will be  followed by cocktail & dinner

ARCHIVES 2014 - 2018

Home of ASM International

Pune Chapter

20TH JULY 2016

6:30 PM

KNOWLEDGE SHARING & NETWORKING MEETING

"FORGING SIMULATION"

by

mR. SATYAJEET KULKARNI
dY. MANAGER, ARAI FORGING IND. DIV.

VENUE : ARKEY CONFERENCE SERVICE CELL, 6TH LANE, PRABHAT ROAD, PUNE 

22 February 2017
KNOWLEDGE SHARING & NETWORKING MEETING
tOPIC: sOLAR eNERGY
Speaker: Mr. N K Joshi

Venue: ARKEY CONFERENCE SERVICE CELL, 6TH LANE, PRABHAT ROAD, PUNE

7th & 8th november 2017

​2 DAY TEACHERS CAMP ON CHALLENGES AND OPPORTUNITIES IN MATERIALS ENGINEERING

Speaker: Dr. Zoltan, Dr. Imre Felde, Dr. Sundar Atre, Dr. Rajukumar Singh, Mr. Pradeep Goyal, Mr. V. K. Purohit, Mr. Sudhir Phansalkar, 

Mr. S. G. Kulkarni, and Mr. Thakur Desai.

​Venue: ARAI - KOTHRUD, PUNE  

15th october 2017 - 4:30 pm

Program Details:

1] Topic : Shot Peening
2] Speaker : Mr Steve E Ferdon
3] Venue : Tarawade Clarks Inn.Shirole Road, Hotel Shivsagar Lane, off J M Road , Pune
4] Day, Date , Time : Wednesday, 14th October, 7.00 PM

Map: https://goo.gl/maps/71MEew9n2Ln

10 april to 12 april 2017
3 day Proficiency Improvement Programme on
Metallurgy for Non Metallurgist

Conducted by ARAI Academy & ASM International Pune Chapter
Venue: ARAI - FID, Chakan, Pune

24TH & 25TH FEBRUARY, 2016 PUNE

A CONFERENCE AND CONCURRENT EXHIBITION 

MATERIALS & MANUFACTURING TECHNOLOGY
M&MT 2016
WITH A FOCUS ON AUTOMOTIVE POWER TRAIN 

16th nov 2016

6.30 PM

TECHNICAL presentation 

TOPIC:

data analysis / iot & business intelligence

BY:

MR. ANIRUDDHA MAYADEO

VENUE : ARKEY CONFERENCE SERVICE CALL
6TH LANE, PRABHAT ROAD, PUNE